Charcoal Powder Crusher

Model:           HR50
Dimension:1.6*0.7*1.3(M)
Power:         11KW
Capacity:      600-800kg/h
Weight:         400kg
Contact Us Email

►1.The parts are as follows:

1), feeding institutions: mainly by the feeding station, up and down Cao Kun, set the blade, set the knife bearing seat.
2), cut off the throwing institutions: mainly by the knife, cutter, locking screws and other components.
3), transmission: mainly by the V-belt, drive shaft, gear, universal joints and other components.
4), walking institutions: mainly composed of caster.
5), protective device: by the protective cover composition.

►2.Maintenance procedures
1)For each operation of 1 month, the roller bearing lubrication 1, the use of lithium grease grease.
2)Monthly inspection of the first roll of tooth wear on the wear of serious roll should be repaired or replaced.
3)Check the various fasteners at any time, no loose phenomenon.
4)Check the spring spring tightening, at any time to make the necessary adjustments.
5)Check the operation and wear of the V-belt every month to ensure the tension of the V-belt, the wear of the V-belt should be replaced.
6)Check the work of the bypass body every month.

►3.Maintenance procedures
Minor repair every six months, including:
1)Clean the pneumatic triple and solenoid valves.
2)Check if the bolts in the motor terminal box are loose and replace the damaged seals.
3)Rinse and lubricate roller bearings.
4)Check the sprocket, chain wear.
5)Check the tightening of the compression spring and make the necessary adjustments.
6)Check the wear of the crushing roller.

 

Model HR40 HR50 HR80
Power/kw 7.5kw 11 22
Capacity/kg 400-600 600-800 1500-
Net/Gross weight 350/400 400/450 490/560
Dimension(m) 1.5*1*0.8 1.6*0.7*1.3 1.6*1.2*1.4