Sawdust Dryer In Charcoal Moulding Process

Sawdust dryer is necessary equipment in charcoal mouling Process. Sawdust dryer is used to dehydrate wet sawdust into dry powdered or granular sawdust before you making biomass briquette or charcoal briquette. It make sure the raw material moisture is 8-12%.  
 
The sawdust dryer consists of heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. Wet material is put into the hopper by screw feeder and at the same time fuel furnace produces large volume of hot air, which is driven into steel pipes, mixed with wet sawdust(your materials) and attracted through curving pipes and drying chamber by the power of fan blower.
 
Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, and moisture evaporates as the material traverses along the steel pipe and is rendered dry at the discharge end. Humid air is continuously exhausted, thus the material is dried.
 
Hongrun series machine have crusher, sawdust dryer, charcoal extruder machine, carbonization furnace and can successive deal with material until finishing molding charcoal products. If you are interested in wood branches charcoal making machine, please do not hesitate to contact us, we will offer you best service. 
 
Related Product: Sawdust Dryer