Charcoal production methods are divided into four steps charcoal machine
Crush: Crusher smash the raw material into a pellet;Drying: and then the particles through the dryer drying, avoid water; Stick: the dried material is made into a rod by a bar charcoal machine;Finally, after carbonization of carbonization furnace, cooling is finished charcoal.
Charcoal machine production process
Production process of charcoal machine: material crushing, drying, rod making charcoal machine, carbonization, the main equipment has a grinder, dryer, rod making machine, carbonization furnace;The charcoal machine mainly includes the bar making machine and the drying machine;Drying machine, automatic feeding over drying, the exhaust port is not channeling material outlet not spray material falls naturally, can produce four sets for rod machine. The automatic temperature control system stick machine, can adjust the best density, this technology not only can guarantee the best quality.Branches, leaves, sawdust and other crops as raw material, after crushing and pressing, densification and molding, because instead of the traditional coal, it is referred to as the "straw coal".It is a kind of new fuel. Charcoal machine production process: the materials used hay cutting machine or mill for grinding,The length and the moisture content of the material are within the specified scope: the material feeding machine (belt conveyor) or the artificial material will be sent to the top of the molding machine, which is the finished product,From the source of raw materials to fuel flow: material recovery, cutting, feeding, automatic metal pressing, forming, cooling, transportation, output, civil, small boiler and biomass power plant.Charcoal machine equipment characteristics, the product design is reasonable, reliable manufacturing quality, has the advantages of simple structure, convenient operation, small size, less land occupation, labor saving, power saving features.Two, the design of automatic control electric heating device, can adjust the material dry humidity, to ensure the stability of the material, improve the work efficiency.Three, the main parts of the product are made of wear-resistant materials by special treatment, so it can be continuous production, durable. Four, suitable for all kinds of biomass raw materials, forming, and less energy consumption, high production efficiency.Five, three bearing the heart of the old machine is four, an increase of the machine stability and durability. Six, change the old with oil type lubrication oil immersed lubrication, as long as no shortage of oil, can be used for many years.Seven, increase the pitch to increase the amount of feed, thereby greatly improving the yield. Eight, improved the structure of the molding cylinder, reducing the friction between the machine and the raw materials.
